Foundation Shade Finder
Find your skin depth and undertone from a photo, a color, or a quick quiz. Then see how to read brand shade codes, pick a starting shade in any range, and plan your swatch test.
Photo and screen colors depend on your camera, lighting, and display. Treat this tool as a starting point, then confirm with a swatch test in daylight. It is not a medical or skin-health tool.
Your result
Undertone quiz (optional, recommended)
These are common rules of thumb, not a scientific test. Answer at least three questions to use the quiz result.
Shade ladder: five candidate colors
Each tile shows your sample as the outer ring and a candidate as the inner dot. The smaller the visible edge, the better the blend. ΔE is the CIE76 color difference from your sample: below about 2.5 is hard to notice, and above 5 is clearly visible. Select a tile to copy its HEX.
Brand shade guide
Seasonal shift preview
Sample from photo
Upload a photo taken in daylight with no flash or filter, then click your jawline or neck. The tool averages a small area around your click. Your photo stays in your browser.
Export
Saved results
What is a foundation shade finder?
A foundation shade finder estimates your skin depth and undertone and tells you what to look for on a foundation label. This tool reads a skin color from a photo, HEX code, or depth swatch, adds an undertone quiz, builds a shade ladder, and explains how brands such as MAC and others name their shades. It gives you a starting point to narrow your options, and a swatch test in daylight confirms the final match.
Key takeaways
- A good match needs three things: depth, undertone, and how the formula behaves on your skin.
- The tool shows your depth on a 12-step band and your skin color class using the ITA method.
- Brand letter codes are not standardized. MAC NC suits golden skin and NW suits pink skin, which surprises many people.
- Enter a brand range size to get a starting shade position, then test two or three neighbors.
- Always swatch along the jawline and neck in daylight. Photos only estimate.
How to use the foundation shade finder
You can narrow down your shade in a few minutes. Follow these steps.
- Start with your skin colorUpload a photo and click your jawline or neck, type a HEX code, or choose the closest depth swatch if you have no photo. Use daylight, no flash, and no filter.
- Answer the undertone quizFive quick questions about veins, jewelry, sun reaction, white clothing, and how your skin looks in photos. The tool combines your answers with the photo estimate.
- Read your depth and undertoneSee your depth band from 1 to 12, your skin color class, your undertone, and how reliable the result is.
- Compare the shade ladderThe ladder shows five candidate colors, from two steps lighter to two steps deeper. The ring and dot view shows how well each one blends into your sample.
- Get brand shade-code guidanceChoose how your brand names its shades (MAC-style, W/C/N letters, extended letters, names, or numbers), enter its range size, and get the letter code and a starting shade position.
- Swatch test before you buyTest two or three shades on your jawline and neck in daylight, wait a few minutes, and pick the one that disappears. Use the seasonal slider to plan for tanning.
How foundation shade matching works
Every foundation match combines three parts. Depth is how light or deep your skin is. Undertone is the subtle color that sits under the surface: cool (pink or red), neutral, warm (yellow or golden), or olive (a green or gray-gold cast). Formula behavior covers finish, oxidation, and how the product looks once it dries. Depth is the easiest part to get right. Undertone is harder, and the formula can shift a shade that looked right in the bottle.
How this tool measures depth and undertone
The tool converts your sampled color to CIELAB, a color space built around human vision. It uses the lightness (L*) value to place you on a 12-step depth band, and it calculates the Individual Typology Angle (ITA), a value that dermatology research uses to group skin color from very light to dark. For undertone, it looks at the hue angle of the color and combines that estimate with your quiz answers. Hue from a photo is sensitive to lighting, so the tool lowers its confidence when you use only the photo.
Undertone guide
| Undertone | How it often looks | Common clues | Label hints |
|---|---|---|---|
| Cool | Pink, red, or slightly blue cast | Silver flatters, veins look blue or purple, burns easily | C, sometimes P; MAC NW |
| Neutral | No strong pink or yellow lean | Both metals work, veins look mixed | N |
| Warm | Yellow, golden, or peach cast | Gold flatters, veins look green, tans easily | W, Y, or G; MAC NC |
| Olive | Yellow with a green or gray-gold cast | Pink-leaning shades can look ashy, very yellow shades can look orange | O in some brands; MAC C or NC |
These clues are rules of thumb. Some people show mixed signals, and undertone is easier to judge by comparing foundation swatches than by any single clue.
How brands name their shades
Brands do not share one shade system, so the same letter can mean different things. Use the table as a map, then read the brand own shade guide.
| System | What the codes usually mean | Watch out for |
|---|---|---|
| MAC-style: NW, N, NC, C | NW is Neutral Warm and suits pink-leaning skin. NC is Neutral Cool and suits golden, yellow-leaning skin. N is neutral. C is cool and leans yellow or olive. | The letters describe the foundation, so they read opposite to skin undertone. A lower number is lighter. |
| W, C, N letters | W is warm (yellow or golden), C is cool (pink or red), N is neutral. | Number scales differ by brand, and some brands put the letter before the number and others after it. |
| Extended letters | Extra letters such as Y, G, P, and O may mean yellow, golden, pink, and olive. | These are not standardized. Check the legend. |
| Shade names | Words such as ivory, beige, honey, or caramel hint at depth and tone. | Names vary widely and say little about undertone. |
| Numbers only | The number usually shows depth. | There is no undertone code, so use the brand finder and swatches. |
Swatch test: how to choose between shades
- Pick two or three candidates. Choose your tool result, one step lighter, and one step deeper.
- Apply stripes along your jawline. Cover both face and neck so you can judge the edge.
- Check in daylight. Store lighting can change how a shade looks. Step near a window or outside.
- Wait a few minutes. Some formulas change as they dry or oxidize.
- Choose the shade that disappears. If two look close, pick the one that blends better with your neck and chest.
If you fall between two shades, many people buy both and mix them, or switch shades with the seasons. The seasonal preview in the tool shows how noticeable that shift may be for you.
Photo sampling tips
Use daylight from a window, with no flash and no beauty filter. Sample your jawline or neck instead of a flushed cheek or a shadowed area. Turn off any camera mode that auto-edits skin tone. Phone cameras adjust white balance automatically, which can make skin look warmer or cooler, so use the depth result more than the photo undertone. For exact pixel values from any image, try the Image Color Picker.
Common foundation matching mistakes
- Matching your redness or a tan line. Match the jawline and neck, not a flushed spot.
- Testing on your hand. Hands often differ from the face in depth and undertone.
- Judging in store lighting only. Check the shade in daylight before you commit.
- Reading letter codes as undertone. A brand code describes the product, and systems such as MAC NC and NW read opposite to what many expect.
- Ignoring oxidation. A shade that looks right at first can darken after several minutes.
- Assuming one shade fits all year. Tanning and seasonal changes can move your match by a step.
Want to explore skin tones and other colors visually? Try the Color Palette Generator, or see how a color pairs with others on the Color Wheel.
Frequently asked questions
What is a foundation shade finder?
A foundation shade finder estimates your skin depth and undertone and tells you what to look for on a foundation label. This tool reads a skin color from a photo, HEX code, or depth swatch, adds an undertone quiz, and explains how brands name their shades. It does not contain a database of every brand shade.
How do I find my foundation shade?
Match three things: depth (how light or deep your skin is), undertone (cool, neutral, warm, or olive), and the way the formula looks on your skin. Use this tool to get depth and undertone, then swatch two or three shades along your jawline in daylight and choose the one that blends into your neck.
How do I find my undertone?
Common clues are vein color, whether silver or gold jewelry flatters you, how your skin reacts to sun, and whether cream or stark white looks better near your face. These clues are rules of thumb, not a scientific test. The most reliable check is comparing foundation swatches in daylight.
What do W, C, and N mean in foundation shade names?
In many brands, W means warm (yellow or golden), C means cool (pink or red), and N means neutral. Some brands add letters such as Y, G, P, or O, and some use only names or numbers, so always read the brand own shade legend.
What do NC and NW mean in MAC foundation?
MAC groups its foundations as NW (Neutral Warm), N (Neutral), NC (Neutral Cool), and C (Cool). The letters read opposite to what many people expect: NC shades suit golden, yellow-leaning skin and NW shades suit pink-leaning skin. MAC says a lower number is a lighter shade.
Where should I test foundation on my skin?
Swipe a stripe along your jawline so it covers both your face and neck. Check it in daylight and wait a few minutes, because some formulas change as they dry or oxidize. The right shade looks like it disappears.
Should foundation match my face or my neck?
Aim for a shade that blends along the jawline and looks natural with your neck and chest. Faces often have redness or sun exposure that differs from the neck, so matching a flushed spot alone can lead to a mismatch.
What if I am between two shades?
There is no single rule. Choose the shade that blends better with your neck and compare it in daylight. Many people buy the two neighboring shades and mix them, or use the lighter one in winter and the deeper one in summer.
Can a photo find my foundation shade?
A photo gives a useful estimate of depth, but phone cameras change color with white balance, lighting, and filters. Use the photo result to narrow your options and confirm with a swatch test. Undertone from a photo is less reliable than depth.
Do I need different shades in summer and winter?
If your skin tans or lightens noticeably across the year, one shade may not fit all seasons. The seasonal slider in this tool shows how far your color may shift and how noticeable that change could be. Mixing two shades or buying a second one are common solutions.
What is ITA and why does this tool use it?
ITA is the Individual Typology Angle, a value calculated from CIELAB lightness and yellow-blue values. Dermatology research uses it to group skin color from very light to dark. This tool shows your ITA class next to a 12-step depth band so you can see where you sit.
Is the foundation shade finder free and private?
Yes. It is free, needs no account, and runs in your browser. Photos are not uploaded to a server. Saved results stay in your own browser storage.
More color tools
Sources and further reading
- M·A·C: Foundation Shade Finder (NW, N, NC, C color groups)
- Boots: M·A·C find your shade (lower number is lighter)
- Wikipedia: CIELAB color space
- Wikipedia: Color difference (Delta E)
- Wikipedia: Fitzpatrick scale
- Chardon A, Cretois I, Hourseau C. Skin colour typology and suntanning pathways. International Journal of Cosmetic Science, 1991 (origin of the Individual Typology Angle).